Skip to main content

GL-MiFi 4G Smart Router Setup Guide

This guide will walk you through how to pair a GL-MiFi 4G Smart Router with a Telnyx SIM Card.

Prerequisites to complete the GL-MiFi 4G Smart Router setup:​

  1. A Telnyx Portal account and active Telnyx SIM card with data plan. Check out this Quickstart Guide to get set up.
  2. GL-MiFi device.
  3. A computer with a browser.

Alright, let's get started!

Instructions for setting up your GL-MiFi 4G device:​

  1. First, insert the SIM card into the device. Look at the picture below for the proper placement of the SIM card, the gold chip should be facing up.

    Insert the Telnyx SIM into your GL-MiFi device

  2. Power on the device and connect either via the Ethernet port or WiFi connection.The default WiFi credentials are located on a label at the bottom of the device.

  3. Navigate to the device’s default gateway at 192.168.8.1 and log into the device. You'll be prompted to set an admin password but if you don't see the prompt, the default password is admin.

  4. Once you’ve logged in, click on manual setup located in the Cellular Modem Overview section. Enter the following details as shown below and click Apply.

    • Device: /dev/cdc-wdm0
    • APN: data00.telnyx

    Log into your GL-MiFi device

  5. The device will now attach to the Telnyx network. You can verify the connectivity by checking the front page of the default gateway as shown below. You'll notice that the device now shows a Disconnect button as well as IP address and data usage.

    Your GL-MiFi device will now connect to the Telnyx network

  6. To check your connectivity, you can also check the fourth icon on the left of the overview diagram. It will indicate I TIM.

    Check your connectivity to the Telnyx network on your GL-MiFi Router

That's it! Your GL-MiFi 4G Smart Router is all set up with a Telnyx SIM card.

On this page​