This guide will walk you through how to set up the Pepwave Max BRI Mini LTE cellular router with a Telnyx SIM card.
Note: this is a standalone setup guide; it does not utilize the InControl Cloud Controller.
- 1A Telnyx Portal account and active Telnyx SIM card with data plan. Check out this Quickstart Guide to get set up.
- 2The Pepwave Max BRI Mini LTE Device.
- 3A computer.
- 4The latest firmware, which can be obtained here.
Alright, let's get started!
- 1To start, insert the Telnyx SIM card into either SIM A or SIM B slot on the device and power on the device.The device only accepts the standard size SIM card (the largest SIM card included in the kit).
- 2Connect to the device either via the WiFi credentials listed on the unit below the device or via the WAN/LAN Ethernet port located on the back of the device.
- 3Navigate to
192.168.50.1, this is the default gateway of the device. Now, log in, the default username and password are both
- 4Update the device firmware by navigating to
Firmware, and uploading the firmware file. This may take up to 8 minutes.
- 5Once the update process is complete, you'll be directed to the
Dashboardstab. Click on
Detailsunder WAN Connection Status. Then, scroll down to
Cellular Settingsand make modifications as shown below:
- SIM Card: Specified in Step 1 of this guide
- LTE/3G: Auto
- Band Selection: Auto
- Data Roaming: Checked, Any Countries
- APN: Custom, data00.telnyx
- Username: Leave blank
- Password: Leave blank
- 6Scroll down to the end of this page and press
Save and Apply.
- 7It'll take about 2 minutes to connect and you can verify connectivity by checking the
WAN Connection Statusunder the
Dashboardstab. This will show that you're connected to Telecom Italia Mobile.
That's it! You've just set up your Pepwave Max BRI Mini LTE cellular router with a Telnyx SIM card.