This is the API V2 documentation. To switch out of beta revert back to our API V1.

Open SidemenuDocs
Docs
Close Sidemenu
Choose:
CredentialsIP
CredentialsIP

Configuring a GoAutoDial PBX Trunkconfiguring-a-goautodial-pbx-trunk

Our focus in this article is to achieve the connection between your GoAutoDialTelnyx Developers server, and our Mission Control Portal. We will describe a sample configuration of the outbound, and inbound trunk assuming that you already made the main GoAutoDial installation and telecommunication-applications deployment.

GoAutoDial PBX Instructionsgoautodial-pbx-instructions

  1. 1Download - GoAutoDial is available to download from hereTelnyx Developers.
  2. 2Installation - You can view the installation guide hereTelnyx Developers.
  3. 3Configure Your Telnyx Mission Control Portal

Once you've configured your Telnyx account, you can now proceed to setup your GoAutoDial PBX following the guide below.


GoAutoDial PBX Setup Guidegoautodial-pbx-setup-guide

On your GoAutoDial Dashboard page under "Admin Settings/Carrier" click on "Add New Carrier" and then select Manual as the Carrier Type. Provide the following parameters and then click "Submit" once completed:

  • Note: The username and password must match the username and password set on your portal connection.

GoAutoDial - Adding a Carrier (Credentials)

After completing the above step you will have to activate the trunk and add a dial plan to the trunk. On your Dashboard page under "Admin Settings/Carrier/Action" click on "MODIFY CARRIER" for you carrier trunk you created moments ago. Then select "ADVANCE CONFIGURATION" and supply the following parameters:

GoAutoDial - Modifying a Carrier (Credentials)

Account Entry:

[telnyx]
disallow=all
allow=ulaw
allow=alaw
type=friend
dtmfmode=rfc2833
context=default
qualify=yes
insecure=invite
host=sip.telnyx.com
username=connection_username
secret=connection_password

Dialplan Entry:

exten => _X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _NXXNXXXXXX.,1,Dial(SIP/${EXTEN}@telnyx)
exten => _1NXXNXXXXXX.,1,Dial(SIP/${EXTEN}@telnyx)
exten => _6468688074,1,Dial(SIP/8001@default)
exten => _16468688074,1,Dial(SIP/8001@default)

On your Dashboard page under "Admin Settings/Phones/ACTION" click on "MODIFY PHONE 800X" with the following parameters.

  • Note: You can supply a DID from your portal account to the "Outbound CallerID" field of the phone extension. In this example the DID is 6468688074.

GoAutoDial - Modifying Phone Settings (Credentials)

Under "Telephony/Inbound/Phone Numbers (DIDs/TFNs)" click on Add new DID and provide the following parameters:

GoAutoDial - Modifying a DID Record (Credentials)

Please use a DID from your portal account and the phone extension you wish to receive inbound calls to.

Your GoAutoDial credentials trunk should now be ready!

Additional Resourcesadditional-resources

Review our getting started guide to make sure your Telnyx Mission Control Portal account is setup correctly.

Checkout GoAutoDial's WikiTelnyx Developers for extra support.

Need more help configuring your GoAutoDial PBX Trunk? Click the Live Chat icon in the lower right hand corner of your Mission Control Portal and start a chat.

Was this page helpful?was-this-page-helpful